Testo® impeller probe, Ø 16 mm, digital cable-connected

Use the paddle-wheel probe; to determine flow velocity and volume flow with the matching testo multifunction meter (please order separately). Paddle-wheel probe - Equipment Use the permanently attached cable to connect the paddle-wheel probe to the measuring instrument. The probe is equipped with a telescope which has a maximum length of 0.85 m when extended. Thanks to the scaling on the telescope, the immersion depth can be easily read off. The clearly structured measuring menu for volume flow ensures intuitive operation of the measuring device. Thanks to convenient input of the dimension and geometry of the duct cross-section, the volume flow is calculated precisely. Time and point averaging, average volume flow, current measured value and min/max values are displayed in the measuring device. Intelligent calibration concept With the digital probe, you benefit from particularly precise measurement results, as the measurement uncertainty from the meter is eliminated. For calibration, you only send in the probe - so the measuring instrument remains in use throughout. Areas of application of the paddle-wheel probe Ventilation ducts: With the paddle-wheel probe, you can reliably measure flow velocity in ventilation ducts. Benefit from a fast calculation of the volume flow: In the measuring menu "Volume flow" of the suitable measuring device (please order separately), you configure the dimension and geometry of the duct cross-section - the measuring device shows you the volume flow directly.