Testo® 570-1 Set - Digital fitter's aid

To ensure that refrigeration systems and heat pumps function properly and efficiently, pressures; temperatures and any overheating or subcooling of the system must be controlled. The digital fitter's aid testo 570-1 can record or calculate all these values and also enables a temperature-compensated density test. This means that our 4-way installer's aid provides you with the most important information you need for optimum commissioning and maintenance of refrigeration systems or for misdiagnosis. There is no need for time-consuming manual comparisons and calculations (e.g. of superheating and subcooling); which would be necessary when using analogue installer aids. Digital technology eliminates some manual steps and calculations Measured value recording over a period of up to 999 hours: Even for long-term measurements on refrigeration systems or heat pumps, the results are securely stored in the device Real-time acquisition and graphical display of measurement data: Optionally, you can purchase the ''EasyKool'' software, which can be used to graphically prepare the measurement data. This is particularly helpful for discovering sources of error in the event of malfunctions and taking countermeasures if necessary Protocol viewing and printing: the optionally available testo quick printer enables on-site printing of the measurement data. In addition, you can view measurement logs in the ''EasyKool'' software (optional) Suitable for all common refrigerants: The current 40 refrigerants are stored in the installer aid and can be updated as required using the optional ''EasyKool'' software Pressure measurement with automatic temperature calculation: High and low pressure are measured using two temperature-compensated pressure sensors, which also automatically calculate temperatures Three connections for external temperature sensors: Connect up to three temperature sensors (optional) to calculate superheating and subcooling in parallel and record the ambient temperature (e.g. in the cold room).E.g. in the cold room) Integrated vacuum measurement: When evacuating refrigeration systems, you can use the 4-way mounting aid to perform vacuum measurements. The built-in vacuum sensor makes precise vacuum measurements possible Automatic heat pump mode: saves you having to replace refrigerant hoses Other features such as temperature-compensated density testing and automatic ambient pressure compensation are included in the digital fitter's aid Can be used - in compliance with the relevant laws, standards, guidelines of refrigeration systems - for use with A2L refrigerant Together with the testo 570-1 digital fitter's aid, you receive a clamp-on temperature probe. Simply clamped to the pipe, it reliably measures the surface temperature. You can also order connectable probes from our range of probes to measure temperature, current or oil pressure. Robust and handy - the digital fitter's aid is a practical professional The testo 570-1 digital fitter's aid owes its practicality not least to the robust 4-way valve block with 4 connections; 4 hose parkers and its sight glass. Maintenance and service tasks on refrigeration systems and heat pumps are made easier by the handiness of the device. Its sturdy housing protects the digital fitter's aid from shocks. A suspension device at the rear ensures that the device is secured during measurement. In addition, the fitter's aid has a large, illuminated display on which you can read the measured values without difficulty even in a dark environment. Recommendation: If you want to have important accessories right at your fingertips, the testo 570-2 Set digital fitter's aid is a good choice. This installation aid set includes a second clamp temperature sensor, the ''EasyKool'' software, a USB cable, a power supply unit and a carrying case.